CST的Discrete ports仿真dipole天線時,如何更改端口阻抗

請問CST的Discrete ports仿真dipole天線時,如何將仿真系統阻抗由50改為52+j158,謝謝.

以前的帖子里面說可以用lump network element里面的電感值來代替虛部。
不過具體細節不是很清楚。
望給個解答

有誰可以幫忙回答,謝謝.

好像現在還不可以 上次說錯了 請見諒

Macros

Macros

MacrosConstruct Discrete PortsDiscrete port with lumped element
This is useful when the port needs to be matched to an external device whose impedance is not purely real. For example, RFID antennas at low frequencies (in the MHz range) often behave as an inductor: a capacitor needs to be added in series with the discrete port, in order to obtain a good match at the desired frequency.
好像可以完成你要的功能，但是我不知道這么用？
知道的人幫忙說下

誰可以幫忙解釋要如何設置才正確,謝謝.