CST MWS怎樣畫復雜結構的天線

請問怎樣用CST簡單地畫出下面的天線結構哈！并且可以任意地修改參數。求大蝦們知道下。

先用CST Curve畫出閉合的曲線輪廓，然后直接用下圖所示的功能生成平面如果要立體的話，在用Object——》Extrude功能

是否可以將步驟寫的再詳細點，以便大家學習，謝謝了

我寫了個詳細的word。你們慢慢看，有問題再問我。
CST文件是2011的。能打開的就看吧，實際也不用，很快自己就畫完了

謝謝大家熱心回帖！特別是hawk8969，看了你上傳的文件。我差不多都會了。謝謝大家了 O(∩_∩)O

謝謝很有幫助！

為什么我生成平面的時候那些弧線都變成折線了！怎么辦。

只是顯示問題。點擊菜單View->View options
調節(jié)一下就可以了

It is important to know that the modeller uses analytical descriptions of solids; for the display, however, they need to be triangulated within a given accuracy.
Two spheres displayed with low/high shape accuracy (without smooth shading).
Triangulation accuracy slider
Move this slider to adjust the shape accuracy for triangulation. This setting only changes the display information, but does not change any ”internal” description of a solid (Modeler, mesh module, solver, etc.);
Offset between solids slider
Move this slider to adjust distance between the triangulation of adjacent shapes. This setting only changes the display information, but does not changes any ”internal” description of a solid (Modeler, mesh module, solver, etc.);