從ADS Model 轉到CST 設定上的問題.

大家好 有問題詢問先進
我在練習RFID TAG的題目
一開始是用 ADS做練習 結果與實際測試接近
然後再用CST2006 做練習使用從import ---->ADS Model方式呼叫檔案
結果都有很多Warning

想請各位幫忙看一下 并指證我哪里設定錯誤
謝謝各位
======================================================================
Solver cycle: 1
======================================================================
Stimulation at port 1 (mode 1)
--------------------------------------------------------------------------------
Units settings:
Dimensions: um
Frequency:GHz
Time: s
--------------------------------------------------------------------------------
Mesh summary:
< 0.5 :0.3%
< 0.25:0.2%
< 0.1 :0.1%
< 0.05:0.1%
< 0.02:0.0%
Minimal filling: 1.021 %
--------------------------------------------------------------------------------
*** Warning ***
The current settings will propably lead to a very long simulation time.
You may improve the simulation speed by:
1. checking the frequency range and units settings
2. extending the simulation frequency range
3. checking the mesh to avoid very small mesh steps
--------------------------------------------------------------------------------
Subcycle statistics
Number of components in total: 1061396
Number of subcycled components:62875
Number of subcycles: 4
Percentage of overhead: 23.70 %
---
Port: 1
*** Warning ***
Some higher propagating modes at port 1 are not considered in time domain
calculation. This possibly leads to an inaccurate energy balance. Consider to
reduce the port size or decrease the upper frequency limit.
附件里頭有
1.CST檔案(L4.mod)
2.Solver (solver of L4.txt)
3.從官網下載有關RFID資料

L4.rar

1. checking the frequency range and units settings
2. extending the simulation frequency range
3. checking the mesh to avoid very small mesh steps